2501 Westgate Ave, Suite 4, West Palm Beach, FL. 33409
Shop by Category

Beehive® Valve Spring Kit

$279.95

PART NUMBER: 9263323

RMM PART: 0926-3323

BRAND: FEULING OIL PUMP CORP.

NC NY TX WI NV
0 0 0 3 0

09263323,0926-3323,FEULING OIL PUMP CORP.

3 in stock

SKU: 0926-3323 Category:
Street Harley-Davidson 2004 - 2006 1200 Custom XLC -
Street Harley-Davidson 2004 - 2006 1200 Roadster XLR -
Street Harley-Davidson 2004 - 2006 883 Custom XLC -
Street Harley-Davidson 2004 - 2006 883 XL -
Street Harley-Davidson 2004 - 2009 883 Custom EFI XLC -
Street Harley-Davidson 2004 - 2019 1200 Custom EFI XLC -
Street Harley-Davidson 2005 - 2006 883 Low XLL -
Street Harley-Davidson 2005 - 2007 883 Roadster EFI XLR -
Street Harley-Davidson 2005 - 2007 883 Roadster XLR -
Street Harley-Davidson 2006 1200 Low XLL -
Street Harley-Davidson 2006 - 2008 1200 Roadster EFI XLR -
Street Harley-Davidson 2006 - 2010 883 Low EFI XLL -
Street Harley-Davidson 2006 - 2011 1200 Low EFI XLL -
Street Harley-Davidson 2007 Sportster 1200 XL 50 -
Street Harley-Davidson 2007 - 2009 883 EFI XL -
Street Harley-Davidson 2007 - 2012 1200 Nightster XLN -
Street Harley-Davidson 2009 - 2012 Sportster 1200 X XR -
Street Harley-Davidson 2009 - 2012 Sportster 1200 XR -
Street Harley-Davidson 2009 - 2020 Iron 883 XLN -
Street Harley-Davidson 2010 - 2020 Forty-Eight XLX -
Street Harley-Davidson 2011 - 2017 1200 XLCP -
Street Harley-Davidson 2011 - 2019 883 SuperLow XLL -
Street Harley-Davidson 2012 - 2016 Seventy-Two XLV -
Street Harley-Davidson 2014 - 2017 SuperLow 1200 XLT -
Street Harley-Davidson 2016 - 2020 1200 Roadster XLCX -
Street Harley-Davidson 2018 - 2019 Forty-Eight Special XLXS -
Street Harley-Davidson 2018 - 2020 Iron 1200 XLNS -
Fitment Disclosure

This quick reference fitment information is provided for you as a reference from the manufacturer’s information. Consult manufacturer publication(s) and/or website(s) for specific fitment and application information and other important information. This fitment information is based upon the stock version of the motorcycle or unit referenced and any accessory added or other modification could invalidate the quick reference information provided.

General Safety Warning

to follow manufacturer’s recommendations and requirements can cause product failure resulting in serious injury or death. While every effort has been taken in collecting accurate fitment information, RMM Motorsports accepts no liability for loss or damage resulting from errors or omissions. If you believe any of the information provided is erroneous, please email sales@rmmmotorsports.com.

  • Made from premium stress-relieved conical ovate wire
  • Feature extremely high-level of fatigue life
  • Use a much smaller and lighter weight retainer to reduce valve weight and create quicker rev and smoother motion
  • Designed to handle the demands of performance engines with 585" and smaller lift camshafts
  • Kits include: Econo BeeHive® valve springs, lightweight 7° steel retainers, machined heat-treated chromoly spring seats, seat shims, valve locks and a set of premium Viton® valve seals equipped with spring-loaded valve stem wiper system
  • Seat lbs./installed height; 183 lbs. at 1.770" (0.510" lift), 175 lbs. at 1.795" (0.535" lift), 172 lbs. at 1.813" (0.553" lift), 165 lbs. at 1.835" (0.574" lift), 160 lbs. at 1.845" (0.585" lift), 380 lbs. at 1.260" OPEN HEIGHT coil bind at 1.190"
  • Dyno proven and track tested
  • Feuling® BeeHive® valve springs must be installed at the correct OPEN HEIGHT, matching max lift to the open height spec of the valve springs
  • Made in the U.S.A.
  • Econo BeeHive® kits are direct replacement with no machining or rocker box clearance required for cams up to .574" lift for 84-04 Big Twin and 86-03 XL and up to .585" lift for 05-17 Twin Cam.
  • Leave a comment

    Your email address will not be published. Required fields are marked *